Magenta MultiView II DVI-TX Guide de l'utilisateur télécharger pdf (Page 19)

Installation

MultiView™ II DVI-TX Installation and User Guide 14

4.4 Sync Settings

The DVI-TX is factory-configured for auto-detecting the proper sync-mode (RepliSync-I normal/stretched). This

mode is generally compatible with all existing MultiView™ receiver products that support RepliSync (if they are

also using their factory-default settings). However, some video sources may require a custom sync-mode setting

(most especially at 1080p and 1920x1200 video resolutions). For these cases, one of the other available sync-

modes can be selected.

Note that any connected MultiView™ receiver should generally be set to the same sync-mode and may require

other configuration adjustments (such as sync-polarity). Otherwise, you may not get a proper video display

output at that receiver, or none at all.

Perform the procedure below while the transmitter is in the normal operating state (CFG indicator is off):

 Press and release the CFG button once to access configuration-mode (CFG indicator = on).

 Press and release the SEL button once. You will now be able to change sync-mode settings.

 LED indicators 1-3 should be illuminated (either DIM or ON); all others (indicators 4-8) should be off.

 Press the CFG button repeatedly to step through the available sync-mode settings as shown below.

 To leave configuration-mode step through all the options OR leave the buttons untouched for 10 seconds.

LED1 LED2 LED3 FRONT PANEL VIEW SYNC-MODE SETTING

dim dim dim

The DVI-TX will auto-detect the required RepliSync-I

mode (“normal” or “stretched”). This is the factory-

default setting.

dim dim ON

Force RepliSync-I normal Horizontal sync-pulse

encoding.

dim ON dim

Force RepliSync-I “stretched” Horizontal sync-pulse

encoding.

dim ON ON Force RepliSync-II.

ON dim dim

Force fixed-sync mode. NOTE: A connected MultiView

receiver must also be in fixed-sync mode and with H/V

polarities selected at the receiver.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Pas de commentaire

Magenta MultiView II DVI-TX Guide de l'utilisateur Page 19